Aqua Medic Turboflotor Blue 1000 운영 매뉴얼 - 페이지 4

{카테고리_이름} Aqua Medic Turboflotor Blue 1000에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aqua Medic Turboflotor Blue 1000 7 페이지. Protein skimmer for fishes

4. Set-up

The Turboflotor Blue 1000 is a skimmer,

that can be set up in various ways:

1. As an external skimmer, directly mounted on

the aquarium: "Hang on", (fig. 3)

2. For use in the cabinet with a

sump or under tank filter system (fig. 4)

- next to the filter tank

- in the filter tank

Fig.3: Turboflotor Blue 1000 in "Hang on" operation

Set up as an external skimmer on the aquarium - Hang on (fig. 3):

Assemble the necessary parts of the skimmer, (see fig. 1). It now be can be attached to the

aquarium. Look for a protected place within easy reach - at the side or at the back. The venturi

pump is connected with the pressure hose. The length of the flexible tubing should be as short as

possible. The pump must be placed directly below the surface, because the air intake will decrease

if it is mounted deeper. A 6-mm air tube is connected to the air injector (2-9) and fixed above the

water level, so the pump can draw in air. Use the full length of the air hose, which is attached to

the sound absorber (1 - 13).

Now the skimmer can be aligned with the aquarium. The two screws at the bottom of the skimmer

are adjusted in such a way that the skimmer is hanging safely on the aquarium. It is advantageous

if the skimmer is not 100% upright, but leaning slightly (2º) to the aquarium (fig. 3). The skimmer

is then not only hanging more safely, but also back-flow of water from the outflow box over the