Allied Systems LONG REACH CCHA Manuel d'installation, de maintenance et d'entretien - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'installation, de maintenance et d'entretien pour {nom_de_la_catégorie} Allied Systems LONG REACH CCHA. Allied Systems LONG REACH CCHA 19 pages. Carton clamp with load stabilizer

Imprimer la page

3.16 Clamp Open Control

Effective October 7, 2010, safety standard ANSI/ITSDF

B56.1, Section 7.25.7 covers all lift trucks with a load

bearing clamp (paper roll clamp, carton clamp, etc.),

and requires the driver to make two distinct motions

before opening or releasing the clamp. For example,

you must press a switch and then move a lever to

unclamp the load. This requirement applies to new

and used attachments being mounted on trucks which

shipped from the factory after October 7, 2010, and is a

recommended feature to be installed on dealer orders

and existing applications.

WARNING

Load loss hazard.

Injury or equipment/load damage may

result if a fork positioner attachment is

used to clamp a load. The fork positioner

does not have enough clamping force to

safely hold a load.

Always support the load with the forks.

Do not use fork positioning attachments

as clamps.

45-034, REV. 5/18