Allied Systems LONG REACH CCHA Handleiding voor installatie, onderhoud en service - Pagina 10
Blader online of download pdf Handleiding voor installatie, onderhoud en service voor {categorie_naam} Allied Systems LONG REACH CCHA. Allied Systems LONG REACH CCHA 19 pagina's. Carton clamp with load stabilizer
Pagina afdrukken3.16 Clamp Open Control
Effective October 7, 2010, safety standard ANSI/ITSDF
B56.1, Section 7.25.7 covers all lift trucks with a load
bearing clamp (paper roll clamp, carton clamp, etc.),
and requires the driver to make two distinct motions
before opening or releasing the clamp. For example,
you must press a switch and then move a lever to
unclamp the load. This requirement applies to new
and used attachments being mounted on trucks which
shipped from the factory after October 7, 2010, and is a
recommended feature to be installed on dealer orders
and existing applications.
WARNING
Load loss hazard.
Injury or equipment/load damage may
result if a fork positioner attachment is
used to clamp a load. The fork positioner
does not have enough clamping force to
safely hold a load.
Always support the load with the forks.
Do not use fork positioning attachments
as clamps.
10
45-034, REV. 5/18