Aqua One Aqua Nano Bow 80 Manuel d'instructions de montage - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de montage pour {nom_de_la_catégorie} Aqua One Aqua Nano Bow 80. Aqua One Aqua Nano Bow 80 12 pages.

Imprimer la page
Step 13
Fit the Doors and
Handles
The easiest way to
attach each Door is to fit
the top Hinge first, then
align and fit the other
Hinge.
a:
Push the Hinge
onto the front part of the
Hinge Plate.
The recess at the bottom
of Screw B goes into the
slot in the Hinge Plate.
b:
Keep the Hinge
FLAT against the Hinge
Plate as you slide it
across as far as it will go.
Tighten Screw A.
c:
The Hinge must be
flat against the Hinge
Plate prior to any
adjustment.
d:
The Hinge must NOT
BE AT AN ANGLE to the
Hinge Plate when
assembled.
This would indicate that
the recess at the bottom
of Screw B had not
located in the slot in the
Hinge Plate and the
Hinge would not be
secure.
Remove the Hinge from
the Hinge Plate and then
re-assemble being
careful to follow
instructions a-c.
e:
Attach a Handle to
each Door using the
25mm Screws.
a:
L
c:
L
Peel off the protective coating on the
panels and edging tape where present
L
M
M
B
d:
M
B
J
7
b:
L
A
L
M
e:
E
E
8
M
J