Aqua One Aqua Nano Bow 80 Manuel d'instructions de montage - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de montage pour {nom_de_la_catégorie} Aqua One Aqua Nano Bow 80. Aqua One Aqua Nano Bow 80 12 pages.

Imprimer la page
Step 11
This unit must be fixed to a wall using the
Secure the unit to a
2 Overbalance Protector Kits provided
wall
a:
Before fitting the unit
to a wall, use a spirit
level to check the top of
a:
the unit is level,
front-to-back and
side-to-side in the 3
positions shown.
Use suitable packing
pieces (not supplied) to
make the unit level.
To prevent possible
Top
overbalancing this unit
must be secured to a
b:
K
K
suitable wall by fitting the
2 Overbalance Protector
Kits to a wall.
b:
Push the unit up
against the wall and slide
the Brackets against the
K
wall. Fit the 2nd Screw
from the kits into the
underside of the Top
panel.
K
Mark the slot at the back
of the Brackets for drilling
into the wall.
Wall fixings are not
supplied as they will need
to suit the wall type.
Take care when drilling
the wall that you do not
drill into any pipes, wires
etc. If in doubt, consult an
expert.