ABACUS Challenger 1 LED-1500W Manuel d'installation - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} ABACUS Challenger 1 LED-1500W. ABACUS Challenger 1 LED-1500W 12 pages.
Imprimer la pageOPTION 3 – remote driver installation
1
•
Open the floodlight junction box.
•
Disconnect the DC input 8 wire cable
① (H07RN-F 8x1.0mm2) and remove it
•
Replace the gland ② if required.
②
3
•
Install the floodlight on the mounting bracket with an
M20 (grade 8.8 or higher) nut and bolt (max torque
settings 500Nm)
2
•
Connect a new DC input cable of sufficient length and
connect it as per below (max cable length 200m).
•
Use new M25 gland if required (not included).
•
Use cable protection if required (not included).
②
①
1500W 1 single cable for NTC.
4
•
Remove the driver terminal cover (4 bolts T20 Torx)
•
Remove the cable gland ①
8
NTC
①
DC input