- ページ 8

屋外ライト ABACUS Challenger 1 LED-1500WのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。ABACUS Challenger 1 LED-1500W 12 ページ。

OPTION 3 – remote driver installation
1
Open the floodlight junction box.
Disconnect the DC input 8 wire cable
① (H07RN-F 8x1.0mm2) and remove it
Replace the gland ② if required.
3
Install the floodlight on the mounting bracket with an
M20 (grade 8.8 or higher) nut and bolt (max torque
settings 500Nm)
2
Connect a new DC input cable of sufficient length and
connect it as per below (max cable length 200m).
Use new M25 gland if required (not included).
Use cable protection if required (not included).
1500W 1 single cable for NTC.
4
Remove the driver terminal cover (4 bolts T20 Torx)
Remove the cable gland ①
8
NTC
DC input