DFI ST101-SR Manuel d'installation
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} DFI ST101-SR. DFI ST101-SR 9 pages. Small form factor series embedded system with industrial mini-itx motherboard
Également pour DFI ST101-SR : Brochure & Specs (2 pages)
Imprimer la pageRemoving the Chassis Cover
1. Make sure the system and all other peripheral devices connected to it has been
powered-off.
2. Disconnect all power cords and cables.
3. The screw at the rear panel is
used to secure the cover to the
chassis. Remove the cover screw
then put it in a safe place for later
use.
4 Lift the cover by first pulling it
backward (1) then lifting it up (2).
Removing the Drive Bay Bracket
1. The drive bay bracket is readily
accessible when you remove the
cover.
ST101-SR
Installation Guide
(2)
Drive bay
bracket
1/9
Side view
(1)