DFI ST101-SR Kurulum Kılavuzu
Masaüstü DFI ST101-SR için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. DFI ST101-SR 9 sayfaları. Small form factor series embedded system with industrial mini-itx motherboard
Ayrıca DFI ST101-SR için: Broşür ve Teknik Özellikler (2 sayfalar)
Sayfayı YazdırRemoving the Chassis Cover
1. Make sure the system and all other peripheral devices connected to it has been
powered-off.
2. Disconnect all power cords and cables.
3. The screw at the rear panel is
used to secure the cover to the
chassis. Remove the cover screw
then put it in a safe place for later
use.
4 Lift the cover by first pulling it
backward (1) then lifting it up (2).
Removing the Drive Bay Bracket
1. The drive bay bracket is readily
accessible when you remove the
cover.
ST101-SR
Installation Guide
(2)
Drive bay
bracket
1/9
Side view
(1)