Allied Telesis AT-8948 Comment configurer - Page 7

Parcourez en ligne ou téléchargez le pdf Comment configurer pour {nom_de_la_catégorie} Allied Telesis AT-8948. Allied Telesis AT-8948 9 pages. At-8900 series
Également pour Allied Telesis AT-8948 : Fiche technique (4 pages), Fiche technique (3 pages), Fiche technique (3 pages), Fiche technique (2 pages), Fiche technique (5 pages), Vue d'ensemble (1 pages), Brochure (8 pages), Manuel complémentaire (6 pages), Manuel d'installation rapide (13 pages)

Distribution switch 1 configuration

The LAN off this switch uses VLAN 1. This exists by default, so you only need to change

ports 1 and 2 to tagged ports and enable STP. STP is necessary because each distribution

switch forms a loop with the two core switches.

Distribution switch 2 configuration

The LAN off this switch uses VLAN 2, which you need to create.

Distribution switch 3 configuration

The LAN off this switch uses VLAN 3, which you need to create.

Page 7 | AlliedWare™ OS How To Note: VRRP

set system name=distro1

enable stp=default

set stp=default mode=rapid

set vlan=1 port=1-2 frame=tagged

set system name=distro2

create vlan=vlan2 vid=2

add vlan=2 port=3-24

add vlan=2 port=1-2 frame=tagged

enable stp=default

set stp=default mode=rapid

set system name=distro3

create vlan=vlan3 vid=3

add vlan=3 port=3-24

add vlan=3 port=1-2 frame=tagged

enable stp=default

set stp=default mode=rapid

Distribution switch 1 configuration