Allied Telesis AT-8948 How To Configure - Page 7

Browse online or download pdf How To Configure for Switch Allied Telesis AT-8948. Allied Telesis AT-8948 9 pages. At-8900 series
Also for Allied Telesis AT-8948: Datasheet (4 pages), Datasheet (3 pages), Datasheet (3 pages), Datasheet (2 pages), Datasheet (5 pages), Overview (1 pages), Brochure (8 pages), Supplementary Manual (6 pages), Quick Install Manual (13 pages)

Print Page

Distribution switch 1 configuration

The LAN off this switch uses VLAN 1. This exists by default, so you only need to change

ports 1 and 2 to tagged ports and enable STP. STP is necessary because each distribution

switch forms a loop with the two core switches.

Distribution switch 2 configuration

The LAN off this switch uses VLAN 2, which you need to create.

Distribution switch 3 configuration

The LAN off this switch uses VLAN 3, which you need to create.

Page 7 | AlliedWare™ OS How To Note: VRRP

set system name=distro1

enable stp=default

set stp=default mode=rapid

set vlan=1 port=1-2 frame=tagged

set system name=distro2

create vlan=vlan2 vid=2

add vlan=2 port=3-24

add vlan=2 port=1-2 frame=tagged

enable stp=default

set stp=default mode=rapid

set system name=distro3

create vlan=vlan3 vid=3

add vlan=3 port=3-24

add vlan=3 port=1-2 frame=tagged

enable stp=default

set stp=default mode=rapid

Distribution switch 1 configuration