Allied Telesis AT-WR4662n Manuel de référence des commandes - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel de référence des commandes pour {nom_de_la_catégorie} Allied Telesis AT-WR4662n. Allied Telesis AT-WR4662n 16 pages. High-speed mobility wireless base router
Également pour Allied Telesis AT-WR4662n : Manuel d'installation rapide (2 pages)

Imprimer la page

Allied Telesis AT-WR4662n Manuel de référence des commandes

Cell size expansion via WDS

This example depicts a network design with a Wireless Distribution System expanding the

coverage area of an RF cell.

Bridge0

Figure 4: RF cell size expansion via WDS

Common setup

Enter the following commands to restore the factory configuration for bridged mode:

AT-WR4600# copy nvram:/factory-config-bridged startup-config

AT-WR4600# reload

Configure the common SSID for open authentication:

AT-WR4600(config)# dot11 ssid ATIopen

AT-WR4600(config-ssid)# authentication open

AT-WR4600(config-ssid)# guest-mode

AT-WR4600(config-ssid)# exit

[Bridge0] station role: root bridge

Assign the static IP address:

AT-WR4600(config)# interface vlan1.1

AT-WR4600(config-if)# no ip address dhcp

AT-WR4600(config-if)# ip address 10.0.0.100/24

AT-WR4600(config-if)# exit

PN 613-001765 Rev.A

STA AP

Repeater

STA

Bridge2

STA

Bridge1