Allied Telesis AT-WR4662n 명령 참조 매뉴얼 - 페이지 14

{카테고리_이름} Allied Telesis AT-WR4662n에 대한 명령 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Allied Telesis AT-WR4662n 16 페이지. High-speed mobility wireless base router
Allied Telesis AT-WR4662n에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (2 페이지)

페이지 인쇄

Cell size expansion via WDS

This example depicts a network design with a Wireless Distribution System expanding the

coverage area of an RF cell.

Bridge0

Figure 4: RF cell size expansion via WDS

Common setup

Enter the following commands to restore the factory configuration for bridged mode:

AT-WR4600# copy nvram:/factory-config-bridged startup-config

AT-WR4600# reload

Configure the common SSID for open authentication:

AT-WR4600(config)# dot11 ssid ATIopen

AT-WR4600(config-ssid)# authentication open

AT-WR4600(config-ssid)# guest-mode

AT-WR4600(config-ssid)# exit

[Bridge0] station role: root bridge

Assign the static IP address:

AT-WR4600(config)# interface vlan1.1

AT-WR4600(config-if)# no ip address dhcp

AT-WR4600(config-if)# ip address 10.0.0.100/24

AT-WR4600(config-if)# exit

PN 613-001765 Rev.A

STA AP

Repeater

STA

Bridge2

STA

Bridge1