Dell Inspiron 600m Manuel d'entretien - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Dell Inspiron 600m. Dell Inspiron 600m 41 pages. Hard drive
Également pour Dell Inspiron 600m : Commencer ici (2 pages), Commencer ici (2 pages), Commencer ici (2 pages), Manuel de démarrage (2 pages), Manuel de l'utilisateur (34 pages), Manuel de configuration (2 pages), Pour commencer (2 pages), Manuel de configuration (2 pages), Manuel de configuration (2 pages), Manuel de configuration (2 pages), Manuel de configuration (2 pages), Manuel de configuration (2 pages), Manuel de configuration (2 pages), Manuel de configuration (2 pages), Manuel d'entretien (41 pages), Media Base User's Manual (26 pages), Manuel d'entretien (40 pages), Manuel d'entretien (41 pages), Installation et configuration (38 pages), Démarrage rapide (2 pages), Démarrage rapide (2 pages), Démarrage rapide (2 pages), Configuration de l'ordinateur (2 pages), Manuel d'entretien (4 pages)

Imprimer la page
Dell Inspiron 600m Manuel d'entretien
NOTICE:
the ZIF socket does not require force.
 
NOTICE:
ZIF socket.
1.  Align the pin-1 corner of the microprocessor module with the pin-1 corner of the ZIF socket, and insert the microprocessor module.
 
NOTE:
The pin-1 corner of the microprocessor module has a triangle that aligns with the triangle on the pin-1 corner of the ZIF socket.
 
NOTICE:
 When the microprocessor module is correctly seated, all four corners are aligned at the same height. If one or more corners of the module are higher
than the others, the module is not seated correctly.
2.  Tighten the ZIF socket by turning the cam screw clockwise to secure the microprocessor module to the system board.
3.  Replace the other computer parts you removed earlier in this procedure.
4.  Update the BIOS using a flash BIOS update program floppy disk or CD. For instructions on how to flash the BIOS, see
Back to Contents Page
 
Great user manuals database on
Ensure that the cam lock is in the fully open position before seating the microprocessor module. Seating the microprocessor module properly in
A microprocessor module that is not properly seated can result in an intermittent connection or permanent damage to the microprocessor and
You must position the microprocessor module correctly in the ZIF socket to avoid permanent damage to the module and the socket.
UserManuals.info
"Flashing the
BIOS."