Dell Inspiron 600m Manuel d'entretien - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Dell Inspiron 600m. Dell Inspiron 600m 41 pages. Hard drive
Également pour Dell Inspiron 600m : Commencer ici (2 pages), Commencer ici (2 pages), Commencer ici (2 pages), Manuel de démarrage (2 pages), Manuel de l'utilisateur (34 pages), Manuel de configuration (2 pages), Pour commencer (2 pages), Manuel de configuration (2 pages), Manuel de configuration (2 pages), Manuel de configuration (2 pages), Manuel de configuration (2 pages), Manuel de configuration (2 pages), Manuel de configuration (2 pages), Manuel de configuration (2 pages), Manuel d'entretien (41 pages), Media Base User's Manual (26 pages), Manuel d'entretien (40 pages), Manuel d'entretien (41 pages), Installation et configuration (38 pages), Démarrage rapide (2 pages), Démarrage rapide (2 pages), Démarrage rapide (2 pages), Configuration de l'ordinateur (2 pages), Manuel d'entretien (4 pages)

Imprimer la page
Dell Inspiron 600m Manuel d'entretien
Back to Contents Page

Display Assembly and Display Latch

Dell™ Inspiron™ 600m Service Manual
  Display Assembly
  Display Bezel
  Display Panel
  Display Latch
Display Assembly
 
CAUTION:
 
NOTICE:
as the back panel) on the computer.
 
NOTICE:
1.  Follow the instructions in
2.  Remove the keyboard.
3.  Open the display assembly approximately 180 degrees, and support the display assembly so that it does not open past this position.
4.  Loosen the captive screw that secures the display cable to the system board, and release the cable from the four cable-routing clips.
 
 
 
 
 
1 display
2 cable-routing clips (4)
3 display cable connector
5.  Pull up on the pull-tab that is attached to the display cable connector to remove the connector from the system board.
6.  Remove the three M2.5 x 6-mm screws.
7.  Rotate the display assembly to a 90-degree angle, and lift the display assembly up and out of the computer base.
Great user manuals database on
Before performing the following procedures, read the safety instructions in your Owner's Manual.
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
You must remove the display assembly before you remove the palm rest.
"Preparing to Work Inside the
UserManuals.info
Computer."