Dell Precision Workstation M6400 Remplacement de la carte du système - Page 3

Parcourez en ligne ou téléchargez le pdf Remplacement de la carte du système pour {nom_de_la_catégorie} Dell Precision Workstation M6400. Dell Precision Workstation M6400 4 pages. Latitude ultrabook series; e-family series; mobile precision series
Également pour Dell Precision Workstation M6400 : Manuel pratique (32 pages), Manuel pratique (34 pages), Manuel pratique (46 pages), Informations sur l'installation et les caractéristiques (8 pages), Manuel (46 pages), Manuel pratique (46 pages)

Imprimer la page
Dell Precision Workstation M6400 Remplacement de la carte du système

Programming the Service Tag

After replacing the system board for Latitude E5400, E5500, and Dell Precision
M6400 Mobile Workstations, you need to program the service tag if the following
message is displayed on startup:
WARNING: The Service Tag has not been programmed.
This system will not function properly without a
Service Tag.
The setup utility will launch the Service Tag
installer.
NOTE:
Latitude and Dell Precision E-Series Workstation computers configured
®
with iAMT
receive this message only after the iAMT initialization procedures
are completed.
NOTE:
The battery light on the computer flashes blue and amber during this error.
To program the Service Tag:
1 Press <F2> to enter the system setup program.
2 Enter the correct Service Tag.
3 Perform one of the following steps:
•
If the AC Adapter is already connected, exit the system setup program and
reboot the computer.
•
If the AC Adapter is not connected, turn the computer off, connect the
AC adapter, and then turn the computer back on.