Dell Precision Workstation M6400 Замена системной платы - Страница 3

Просмотреть онлайн или скачать pdf Замена системной платы для Ноутбук Dell Precision Workstation M6400. Dell Precision Workstation M6400 4 страницы. Latitude ultrabook series; e-family series; mobile precision series
Также для Dell Precision Workstation M6400: Руководство по эксплуатации (32 страниц), Руководство по эксплуатации (34 страниц), Руководство по эксплуатации (46 страниц), Информация о настройках и возможностях (8 страниц), Руководство (46 страниц), Руководство по эксплуатации (46 страниц)

Programming the Service Tag

After replacing the system board for Latitude E5400, E5500, and Dell Precision

M6400 Mobile Workstations, you need to program the service tag if the following

message is displayed on startup:

WARNING: The Service Tag has not been programmed.

This system will not function properly without a

Service Tag.

The setup utility will launch the Service Tag

installer.

NOTE:

Latitude and Dell Precision E-Series Workstation computers configured

with iAMT

receive this message only after the iAMT initialization procedures

are completed.

NOTE:

The battery light on the computer flashes blue and amber during this error.

To program the Service Tag:

1 Press <F2> to enter the system setup program.

2 Enter the correct Service Tag.

3 Perform one of the following steps:

•

If the AC Adapter is already connected, exit the system setup program and

reboot the computer.

•

If the AC Adapter is not connected, turn the computer off, connect the

AC adapter, and then turn the computer back on.