Dell Studio 1435 Manuel d'entretien - Page 17
Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Dell Studio 1435. Dell Studio 1435 42 pages. Notebook dell studio 1435
Imprimer la page1 display cable screw
3 power button cable connector
11. Remove the two screws (one on each hinge).
12. Remove the display assembly.
1
display assembly
Replacing the Display Assembly
1. Place the display assembly in position and replace the two screws.
2. Route the camera cable (optional), power button cable, and display cable through the routing guides and connect the cables to the respective system
board connectors.
3. Replace the screw that secures the display cable.
4. Route the Mini-Card antenna cables through the routing guides.
5. Replace the two screws at the base of the computer.
6. Replace the optical drive (see
7. Replace the palm rest (see
8. Replace the keyboard (see
9. Replace the center control cover (see
10. Replace the base cover (see
NOTICE:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in
damage to the computer.
2 camera cable pull-tab (optional)
4 display cable pull-tab
2
screw (2)
Replacing the Optical
Drive).
Replacing the Palm
Rest).
Replacing the
Keyboard).
Replacing the Center Control
Replacing the Base
Cover).
Cover).