Dell Studio 1435 서비스 매뉴얼 - 페이지 17

{카테고리_이름} Dell Studio 1435에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Studio 1435 42 페이지. Notebook dell studio 1435

페이지 인쇄

1. Removing the Coin-Cell Battery

1 display cable screw

3 power button cable connector

11. Remove the two screws (one on each hinge).

12. Remove the display assembly.

display assembly

Replacing the Display Assembly

1. Place the display assembly in position and replace the two screws.

2. Route the camera cable (optional), power button cable, and display cable through the routing guides and connect the cables to the respective system

board connectors.

3. Replace the screw that secures the display cable.

4. Route the Mini-Card antenna cables through the routing guides.

5. Replace the two screws at the base of the computer.

6. Replace the optical drive (see

7. Replace the palm rest (see

8. Replace the keyboard (see

9. Replace the center control cover (see

10. Replace the base cover (see

NOTICE:

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in

damage to the computer.

2 camera cable pull-tab (optional)

4 display cable pull-tab

screw (2)

Replacing the Optical

Drive).

Replacing the Palm

Rest).

Replacing the

Keyboard).

Replacing the Center Control

Replacing the Base

Cover).