Dell Active Fabric Manager Manuel d'installation - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Dell Active Fabric Manager. Dell Active Fabric Manager 44 pages. Active fabric manager installation guide 1.5
Également pour Dell Active Fabric Manager : Manuel d'installation (19 pages)
Step 1: Deploy the OVF Template
You can deploy the Open Virtualization Format (OVF) template with the VMware ESX virtual machine or Workstation 8.0.5
64-bit.
This section contains the following topics:
•
Deploy the OVF Template using the VMware ESX Virtual Machine
•
Deploy the OVF Template Using Workstation 8.0.5
Deploy the OVF Template Using a VMware ESX Virtual Machine
Before you can configure and use AFM, deploy the provided OVF template on a VM on your ESX/ESXi server.
Important: By default, the AFM VM CPU is set to 2. To use the HA, FT, or both, change the virtual CPU to 1.
To deploy the AFM OVF with the vSphere client:
1. Start the VMware® vSphere 5.1 client on your ESX® server or vCenter™.
2. Copy the AFM OVF template files from the directory where you have stored the AFM package to the location that
the vSphere client can access it.
NOTE: If you are using HA or HA with FT, make sure that the OVF uses shared storage. To enable FT, select
the virtual host and then right click to select the Fault Tolerance > Turn On Fault Tolerance option.
3. In the vSphere client, select File > Deploy OVF Template.
4. Choose the Deploy from file option and browse to where you copied the AFM OVF file.
5. Select the AFM1.5.ovf file and then click the Next button.
Important: At the Disk Format screen, make sure you select the Thick Provision Lazy Zero option to ensure
that the AFM has the required disk space for all storage to be immediately allocated.
6. Start the VM. See
Step 2: Start the
Deploy the OVF Template Using Workstation 8.0.5
NOTE: Workstation 8.0.5 is primarily used for pre-sales engagements. It does not support HA or FT.
To deploy the AFM OVF template using workstation:
1. On the VMware Workstation, navigate to the File > Open menu and specify the path of the VM AFM file with
the .ovf extension. For example, AFM1.5.ovf.
VM.
2
9