Dell Active Fabric Manager Manual de instalação - Página 9

Procurar online ou descarregar pdf Manual de instalação para Servidor Dell Active Fabric Manager. Dell Active Fabric Manager 44 páginas. Active fabric manager installation guide 1.5
Também para Dell Active Fabric Manager: Manual de instalação (19 páginas)

Imprimir página

Step 1: Deploy the OVF Template

You can deploy the Open Virtualization Format (OVF) template with the VMware ESX virtual machine or Workstation 8.0.5

64-bit.

This section contains the following topics:

•

Deploy the OVF Template using the VMware ESX Virtual Machine

•

Deploy the OVF Template Using Workstation 8.0.5

Deploy the OVF Template Using a VMware ESX Virtual Machine

Before you can configure and use AFM, deploy the provided OVF template on a VM on your ESX/ESXi server.

Important: By default, the AFM VM CPU is set to 2. To use the HA, FT, or both, change the virtual CPU to 1.

To deploy the AFM OVF with the vSphere client:

1. Start the VMware® vSphere 5.1 client on your ESX® server or vCenter™.

2. Copy the AFM OVF template files from the directory where you have stored the AFM package to the location that

the vSphere client can access it.

NOTE: If you are using HA or HA with FT, make sure that the OVF uses shared storage. To enable FT, select

the virtual host and then right click to select the Fault Tolerance > Turn On Fault Tolerance option.

3. In the vSphere client, select File > Deploy OVF Template.

4. Choose the Deploy from file option and browse to where you copied the AFM OVF file.

5. Select the AFM1.5.ovf file and then click the Next button.

Important: At the Disk Format screen, make sure you select the Thick Provision Lazy Zero option to ensure

that the AFM has the required disk space for all storage to be immediately allocated.

6. Start the VM. See

Step 2: Start the

Deploy the OVF Template Using Workstation 8.0.5

NOTE: Workstation 8.0.5 is primarily used for pre-sales engagements. It does not support HA or FT.

To deploy the AFM OVF template using workstation:

1. On the VMware Workstation, navigate to the File > Open menu and specify the path of the VM AFM file with

the .ovf extension. For example, AFM1.5.ovf.

VM.