Dell Dimension 2400 Series Manuel - Page 28

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Dell Dimension 2400 Series. Dell Dimension 2400 Series 43 pages. Vga card installation instructions
Également pour Dell Dimension 2400 Series : Manuel d'installation rapide (2 pages), Manuel d'installation rapide (2 pages), Manuel d'installation (20 pages), Manuel d'installation (8 pages), Instructions pour l'installation du rack (32 pages), Instructions d'installation (1 pages)

Dell Dimension 2400 Series Manuel
Back to Contents Page
 

Technical Specifications

Dell™ Dimension™ 2400 Series 
 
Microprocessor
 Microprocessor type
 L1 cache
 L2 cache
 
System Information
 System chip set
 DMA channels
 Interrupt levels
 System BIOS chip
 System clock
 
Expansion Bus
 Bus types
 Bus speed
 PCI connectors
 PCI connector size
 PCI connector data width
(maximum)
 
Memory
 Architecture
 Memory connectors
 Memory capacities
 Minimum memory
 Maximum memory
 Memory type
 
Drives
 Externally accessible
 Internally accessible
 
Ports and Connectors
 Externally accessible:
 Serial
 Parallel
 Video
 Keyboard
Intel® Pentium® 4 that runs at 2.2 or 2.4 GHz
internally and 400 MHz externally, or 2.266, 2.4,
2.53, 2.66, 2.8, or 3.06 GHz internally and 533 MHz
externally.
Intel Celeron® that runs at 2.0, 2.2, 2.3, 2.4, 2.5,
2.6, or 2.7 GHz internally and 400 MHz externally.
 8 KB first-level (Pentium 4 and Celeron).
 256- or 512-KB (displayed in the system setup
program) pipelined-burst, eight-way set
associative, write-back SRAM (Pentium 4);
 128-KB SRAM that resides in the processor's core.
The L2 cache runs at the processor's internal clock
speed (Celeron).
 Intel 845GV
 eight
 24 APIC mode
 4 MB (512 KB)
 400- or 533-MHz data rate
 PCI
 PCI: 33 MHz
 three
 120 pins
 32 bits
 DDR SDRAM
 two
 128-, 256-, or 512-MB
 128 MB shared DDR SDRAM
 NOTE: Between 32 and 64 MB of system memory
may be allocated to support graphics, depending on
system memory size and other factors.
  2 GB
 PC2100 (266-MHz) or PC2700 (333-MHz) DDR
SDRAM (non-ECC)
 two 5.25-inch bays
one 3.5-inch bay
 one bay for 1-inch–high IDE hard drive
 9-pin connector; 16550C-compatible
 25-hole connector (bidirectional)
 15-hole connector
 6-pin mini-DIN connector