Dell PowerEdge 4210 Manuel d'installation - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Dell PowerEdge 4210. Dell PowerEdge 4210 24 pages. Cabling poweredge t610
Également pour Dell PowerEdge 4210 : Manuel (20 pages), Manuel (20 pages), Manuel (17 pages), Manuel (12 pages), Manuel (10 pages), Manuel (10 pages), Manuel (9 pages), Manuel (9 pages), Manuel (10 pages), Manuel (12 pages), Manuel (11 pages), Manuel (8 pages)

Dell PowerEdge 4210 Manuel d'installation

Rack Installation Guide

This installation guide provides instructions for trained service technicians to install one or
more Dell™ systems in a Dell four-post rack cabinet. All Dell four-post rack cabinets are
accommodated. One rack kit is required for each system to be installed in the rack cabinet.
Before attempting this installation, you should read this entire document carefully.

Rack Kit Contents

The rack kit includes the following items (see Figure 1-1):
One pair of slide assemblies with mounting brackets
One cable-management arm
Three 6-32 x 0.25-inch pan-head hex-head taptite screws
Two 6-32 x.0.25 flat-head Phillips screws
One cable tray
One rack template
NOTE: The number of parts may vary for rack kits preinstalled by Dell.
NOTE: If you have purchased a Dell rack cabinet with your system, some of the hardware may
be preinstalled in the rack.
NOTE: The nonmetric screws described in illustrations and procedural steps are identified by
size and the number of threads per inch. For example, a #10 Phillips-head screw with
32 threads per inch is identified as a 10-32 screw.
Ra c k In s ta l la ti on Gu i d e
1-1