Dell C3422WE Manuel - Page 18

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Dell C3422WE. Dell C3422WE 21 pages. Curved display manager
Également pour Dell C3422WE : Manuel (6 pages), Manuel de l'utilisateur (20 pages)

Imprimer la page
Dell C3422WE Manuel
Problem
What you
experience
No charging
No charging
when using
USB Type-C
connection
to computer,
laptop, and so
on
Intermittent
Intermittent
charging
charging
when using
USB Type-C
connection to
computer,
laptop, and so
on
No image when
Blank screen or
using USB
2nd DUT is not
Type-C MST
Prime mode
No network
Network
connection
dropped or
Intermittent
The LAN port is
OS setting or
not functioning
cable connection
issue
5. Trouble Shooting Instructions
Possible solutions
• Verify if the device can support one of 5 V/9
V/15 V/20 V charging profiles.
• Verify if the Notebook requires a >90 W power
adaptor.
• If the Notebook requires a >90 W power
adaptor, it may not charge with the USB Type-C
connection.
• Ensure that you use only Dell approved adapter
or the adapter that comes with the product.
• Ensure that the USB Type-C cable is not
damaged.
• Check if the maximum power consumption of
device is over 90 W.
• Ensure that you use only Dell approved adapter
or the adapter that comes with the product.
• Ensure that the USB Type-C cable is not
damaged.
• USB Type-C input, Go to OSD menu, under
Display Info check the Link Rate is HBR2 or
HBR3, if Link Rate is HBR2, suggest to use USB
Type-C to DP cable to turn on MST.
• Do not toggle Off/On the power button when
network is connected, keeps the power button
On.
• Ensure that the latest BIOS and drivers for your
computer are installed on your computer.
• Ensure that the RealTek Gigabit Ethernet
Controller is installed in the Windows Device
Manager.
• If your BIOS Setup has a LAN/GBE Enabled/
Disabled option, make sure it is set to Enabled.
• Ensure that the Ethernet cable is connected
securely on the monitor and the hub/router/
firewall.
• Check the status LED of the Ethernet cable to
confirm connectivity. Re-connect both ends of
the Ethernet cable if the LED is not lit.
• First power off the Computer and unplug the
Type-C cable and power cord of the monitor.
Then, power on the computer, plug in the
monitor power cord and Type-C cable.