Dell UltraSharp UP3218K Manuel de l'utilisateur - Page 20
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Dell UltraSharp UP3218K. Dell UltraSharp UP3218K 50 pages.
Également pour Dell UltraSharp UP3218K : Manuel de démarrage rapide (2 pages), Manuel de démarrage rapide (2 pages), Manuel d'entretien (14 pages), Manuel de démontage (6 pages)
Imprimer la page
NOTE: To use the Display Rotation function (Landscape versus Portrait view) with
your Dell computer, you require an updated graphics driver that is not included with
this monitor. To download the graphics driver, go to
the Download section for Video Drivers for latest driver updates.
NOTE: When in the Portrait View Mode, you may experience performance
degradation in graphic-intensive applications (3D Gaming and etc.).
Adjusting the Rotation Display Settings of Your System
After you have rotated your monitor, you need to complete the procedure below to
adjust the Rotation Display Settings of your System.
NOTE: If you are using the monitor with a non-Dell computer, you need to go the
graphics driver website or your computer manufacturer website for information on
rotating the 'contents' on your display.
To adjust the Rotation Display Settings:
1
Right-click on the desktop and click Properties.
2
Select the Settings tab and click Advanced.
3
If you have an AMD graphics card, select the Rotation tab and set the preferred
rotation.
4
If you have an nVidia graphics card, click the nVidia tab, in the left-hand column
select NVRotate, and then select the preferred rotation.
5
If you have an Intel
Properties, select the Rotation tab, and then set the preferred rotation.
NOTE: If you do not see the rotation option or it is not working correctly, go to
www.dell.com/support
Connecting Your Monitor
WARNING: Before you begin any of the procedures in this section, follow the
Safety
Instructions.
To connect your monitor to the computer:
1
Turn off your computer.
2 Connect the DP-DP/USB cable from your monitor to the computer. (Vertically
extend and tilt the monitor completely to rotate it for cable connection. See
Rotating the
3 Switch on your monitor.
4 Select the correct input source at Monitor OSD Menu and turn on your
computer.
NOTE: UP3218K default setting is DP 1.4. some older DP 1.2 Graphic card may not
display normally. Please refer to
DP connection to the
20
|
Setting Up the Monitor
graphics card, select the Intel graphics tab, click Graphic
®
and download the latest driver for your graphics card.
Monitor.)
"product specific problems – No image when using
PC" to change default setting.
www.dell.com/support
and see