Dell UltraSharp UP3218K 사용자 설명서 - 페이지 20

{카테고리_이름} Dell UltraSharp UP3218K에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell UltraSharp UP3218K 50 페이지.
Dell UltraSharp UP3218K에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 서비스 매뉴얼 (14 페이지), 분해 매뉴얼 (6 페이지)

페이지 인쇄

1. Common Problems

NOTE: To use the Display Rotation function (Landscape versus Portrait view) with

your Dell computer, you require an updated graphics driver that is not included with

this monitor. To download the graphics driver, go to

the Download section for Video Drivers for latest driver updates.

NOTE: When in the Portrait View Mode, you may experience performance

degradation in graphic-intensive applications (3D Gaming and etc.).

Adjusting the Rotation Display Settings of Your System

After you have rotated your monitor, you need to complete the procedure below to

adjust the Rotation Display Settings of your System.

NOTE: If you are using the monitor with a non-Dell computer, you need to go the

graphics driver website or your computer manufacturer website for information on

rotating the 'contents' on your display.

To adjust the Rotation Display Settings:

Right-click on the desktop and click Properties.

Select the Settings tab and click Advanced.

If you have an AMD graphics card, select the Rotation tab and set the preferred

rotation.

If you have an nVidia graphics card, click the nVidia tab, in the left-hand column

select NVRotate, and then select the preferred rotation.

If you have an Intel

Properties, select the Rotation tab, and then set the preferred rotation.

NOTE: If you do not see the rotation option or it is not working correctly, go to

www.dell.com/support

Connecting Your Monitor

WARNING: Before you begin any of the procedures in this section, follow the

Safety

Instructions.

To connect your monitor to the computer:

Turn off your computer.

2 Connect the DP-DP/USB cable from your monitor to the computer. (Vertically

extend and tilt the monitor completely to rotate it for cable connection. See

Rotating the

3 Switch on your monitor.

4 Select the correct input source at Monitor OSD Menu and turn on your

computer.

NOTE: UP3218K default setting is DP 1.4. some older DP 1.2 Graphic card may not

display normally. Please refer to

DP connection to the

Setting Up the Monitor

graphics card, select the Intel graphics tab, click Graphic

and download the latest driver for your graphics card.

Monitor.)

"product specific problems – No image when using

PC" to change default setting.

www.dell.com/support

and see