Dell EMC VxFlex Ready Node R840 Manuel du propriétaire - Page 13
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Dell EMC VxFlex Ready Node R840. Dell EMC VxFlex Ready Node R840 44 pages.
Imprimer la page
Viewing Home screen
The Home screen displays user-configurable information about the system. This screen is displayed during normal
system operation when there are no status messages or errors. When the system turns off and there are no errors,
LCD enters the standby mode after five minutes of inactivity. Press any button on the LCD to turn it on.
Procedure
1.
To view the Home screen, press one of the three navigation buttons (Select, Left, or Right).
2.
To navigate to the Home screen from another menu, complete the following steps:
a.
Press and hold the navigation button till the up arrow
b.
Navigate to the Home icon
c.
Select the Home icon.
d.
On the Home screen, press the Select button to enter the main menu.
Setup menu
The Setup menu contains the following options:
Note:
When you select an option in the Setup menu, you must confirm the option before proceeding to the next
action.
iDRAC
Select DHCP or Static IP to configure the network mode. If Static IP is selected, the available fields are IP,
Subnet (Sub), and Gateway (Gtw). Select Setup DNS to enable DNS and to view domain addresses. Two
separate DNS entries are available.
Set error
Select SEL to view LCD error messages in a format that matches the IPMI description in the SEL. This enables you
to match an LCD message with an SEL entry.
Select Simple to view LCD error messages in a simplified user-friendly description. For information about the
event and error messages generated by the system firmware and agents that monitor system components, see the
Error Code Lookup page at
Set home
Select the default information to be displayed on the Home screen. See View menu section for the options and
option items that can be set as the default on the Home screen.
View menu
The View menu contains the following options:
Note:
When you select an option in the View menu, you must confirm the option before proceeding to the next
action.
iDRAC IP
Displays the IPv4 or IPv6 addresses for iDRAC9. Addresses include DNS (Primary and Secondary), Gateway, IP,
and Subnet (IPv6 does not have Subnet).
MAC
Displays the MAC addresses for iDRAC, iSCSI, or Network devices.
Name
Displays the name of the Host, Model, or User String for the system.
using the up arrow
qrl.dell.com
is displayed.
.
System overview
R840xd Owner's Guide
13