Dell Inspiron 1000 Manuel d'entretien - Page 19

Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Dell Inspiron 1000. Dell Inspiron 1000 46 pages. Dell vostro 1000 quick setup guide
Également pour Dell Inspiron 1000 : Manuel de configuration (2 pages), Démontage du disque dur (9 pages), Spécifications (2 pages), Manuel de configuration (2 pages), Manuel de configuration (2 pages), Configuration de l'ordinateur (2 pages), Configuration de l'ordinateur (2 pages)

1 pull-tab on bottom flex-cable

connector

4 inverter connector

Replacing the Display Panel

1. Reconnect the top display-cable connector to the top flex-cable connector.

2. Reconnect the bottom flex-cable connector to the inverter connector.

3. Replace the display panel inside the display back cover.

NOTE:

The eight screw locations are numbered. Replace the screws in sequential order.

4. Replace the eight M2 x 3-mm screws (four on each side) in order around the display panel.

5. Replace the display bezel (see

Display Latch

CAUTION:

Before you begin the following procedure, follow the safety instructions in the Product Information Guide.

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.

NOTICE:

To help prevent damage to the system board, you must remove the main battery (see

begin working inside the computer.

1. Follow the instructions in

Before You

2. Remove the display assembly (see

3. Remove the display bezel (see

4. Slide the latch to the right and gently lift.

5. Remove the spring that attaches the latch to the display panel.

spring

2 top flex-cable

3 display cable

connector

Replacing the Display

Bezel).

Begin.

Removing the Display

Assembly).

Removing the Display

Bezel).

connector

Before Working Inside Your

Computer) before you