Dell Inspiron 1000 Manuel d'entretien - Page 18

Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Dell Inspiron 1000. Dell Inspiron 1000 46 pages. Dell vostro 1000 quick setup guide
Également pour Dell Inspiron 1000 : Manuel de configuration (2 pages), Démontage du disque dur (9 pages), Spécifications (2 pages), Manuel de configuration (2 pages), Manuel de configuration (2 pages), Configuration de l'ordinateur (2 pages), Configuration de l'ordinateur (2 pages)

3. Replace the six rubber display bumpers around the display bezel.

Display Panel

CAUTION:

Before you begin the following procedure, follow the safety instructions in the Product Information Guide.

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.

NOTICE:

To help prevent damage to the system board, you must remove the main battery (see

begin working inside the computer.

1. Follow the instructions in

Before You

2. Remove the display assembly (see

3. Remove the display bezel (see

4. Remove the eight M2 x 3-mm screws (four on each side of the display panel).

5. Lift the display panel out of the display back cover.

1 display panel

4 grounding wire and captive screw

6. Press in both sides of the top flex-cable connector, and pull the top flex-cable connector away from the display connector.

7. Pull straight up on the pull-tab to disconnect the bottom flex-cable connector from the inverter connector.

Begin.

Removing the Display

Assembly).

Removing the Display

Bezel).

2 display back cover

3 M2 x 3-mm screws (8)

Before Working Inside Your

Computer) before you