Dell PowerEdge 4400 Manuel d'installation - Page 17

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Dell PowerEdge 4400. Dell PowerEdge 4400 28 pages. Wake-on-lan (wol) support on dell servers
Également pour Dell PowerEdge 4400 : Manuel d'installation (42 pages), Manuel d'installation (20 pages), Installation du rack (37 pages), Manuel de mise à jour (8 pages), Information Update (8 pages), Manuel de l'utilisateur (42 pages), Installation du rack (34 pages), Manuel d'installation du matériel (40 pages), Manuel d'installation (36 pages), Manuel (15 pages)

support.dell.com

vertical rail

10-32 x 0.5-inch

screws (2)

front of rack

Figure 1-9. Removing the Slide Assemblies

Repeat step 1 to remove the slide mounting screws at the back of the rack.

Lift the slide assembly out of the rack and place it out of the way.

Repeat this step to remove the slide assembly on the opposite side of the rack.

To remove the cage nuts (used to secure the rack-adapter thumbscrews) from

each vertical rail, use a flat-blade screwdriver or the cage-nut installation tool

(if available), pry down on the outside top edge of the cage nut while pushing

inward on the cage nut to remove it from the vertical rail (see step 3 in

Figure 1-10).

Repeat this step to remove the remaining cage nuts.

Package all the rack installation hardware you removed and label it for future use.

Dell PowerEdge 4x00 and 6300 Systems Tower Installation Guide

slide-assembly

mounting-bracket

flange

alignment

marks

slide

assemblies (2)

slide alignment screws

1-11