Dell PowerVault 221S Mise à jour du micrologiciel - Page 12
Parcourez en ligne ou téléchargez le pdf Mise à jour du micrologiciel pour {nom_de_la_catégorie} Dell PowerVault 221S. Dell PowerVault 221S 14 pages. Dell powervault 220s and 221s systems scsi drive enclosure
Également pour Dell PowerVault 221S : Manuel (44 pages), Avis (28 pages), Manuel d'entretien (33 pages)
Imprimer la page
FILE LOCATION: S:\systems\Zappa\Ts\EMM Firmware_N8865\N8865eb0.fm
5
Download the pv22xLxx.gz utility file from the Dell Support website at support.dell.com and
save the utility to the directory you created in step 3.
6
Uncompress the .gz file.
For example, in the command prompt, type the following and then press <Enter>:
tar -zxvf pv22xL xx .gz
Included in the extracted files are an .exe utility file and a .bin firmware file.
7
Change the file permissions for the extracted .exe file.
In the command prompt, type the following and then press <Enter>:
chmod +x pv22xL
8
Run the utility.
In the command prompt, type the following and then press <Enter>:
./pv22xL -i
9
Record the listed file descriptor of the enclosure you wish to update. An example descriptor
could be /dev/sg8.
10
In the command prompt, type the following and then press <Enter>:
./pv22xL -x < file_name > -d < generic_file_descriptor >
Where < file_name > is the full path name to the location of the firmware .bin file and
< generic_file_descriptor > is the device you are updating.
For example:
./pv22xL -x pv22xs_E17.bin -d /dev/sg8
When the update completes, a message appears indicating that the update was successful.
11
Restart I/O activity to the storage system.
Important Information
Updating the Storage System in Joined Bus or Cluster Mode
When the split-bus module is in the joined-bus mode (default) or cluster mode, the EMM
firmware is downloaded to both EMMs automatically (assuming that the second EMM is
installed).
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 0 / 2 6 / 0 4 – F O R P R O O F O N LY
12
Updating the Enclosure Management Module Firmware