3 Day Blinds 2 1/2 Pour commencer

Parcourez en ligne ou téléchargez le pdf Pour commencer pour {nom_de_la_catégorie} 3 Day Blinds 2 1/2. 3 Day Blinds 2 1/2 8 pages.

2 & 2
/
" WOOD
1
2
& FAUX WOOD
& ANGLED SLAT
BLINDS
STANDARD HARDWARE
GETTING STARTED
A few simple tools are required:
End Brackets
Center Support
(Open Position LH & RH)
Bracket(s)
Steel Tape Measure
Pencil
Level
Screws
Valance Clips
Spacer Block
(standard for 2
/
" Wood
1
2
Power Drill and
Flathead & Phillips
Awl (or tool for starting
& Faux Wood outside
Drill Bits
Screwdriver
a screw hole)
mounted blinds only)
Included in your order is all the hardware necessary for a
normal installation. Depending on the mounting surface,
fasteners other than the screws provided may be required.
OPTIONAL HARDWARE
Wall board and plaster require the use of anchors such as
expansion or toggle bolts. Bricks, tile and stone need special
plugs and drill bits. Wood should always be pre-drilled to
avoid splitting.
Professional installation is also available in most areas,
call 800-800-3329.
Valance & Returns
Hold Down Brackets
with Screws
Valance Return
Glue
Clips
1
| 2 & 2
/
" Wood & Faux Wood & Angled Slat Blinds
1
2