Dell PowerVault 715N Manuel d'entretien - Page 22
Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Dell PowerVault 715N. Dell PowerVault 715N 44 pages. Network attached storage
Également pour Dell PowerVault 715N : Instructions de mise à jour (4 pages), Manuel de l'utilisateur (31 pages)
Imprimer la page
9.
Install the riser
card.
10. Install the
expansion
11.
Install the fan
assembly.
12.
Replace the system
13.
Replace the
bezel.
14. Reconnect any external peripheral cables that you disconnected from their connectors at the back of the system.
15. Connect the power to the system and turn on the system.
System Board Features
Figure 9
defines the system board features. The system board labels are in parentheses. Refer to this figure when
replacing your system board or components that attach to the system board.
Figure 9. System Board Features
Power Supply
Your system has a single power supply, which is secured by a locking tab and four screws (see
CAUTION:
Read the safety instructions in your System Information document.
Figure 10. Power Supply Removal
card.
cover.
1 Fan power connector (CPUFAN1)
2 DIP switch (SW3)
3 Microprocessor and heat sink (CPU)
4 Power supply connectors (CN1 and CN2)
5 Serial port connector (COM1)
6 Memory modules (DIMM1 and DIMM2)
7 PCI riser card slot (PCI1)
8 LAN connectors (LAN1 and LAN2)
9 Battery connector (BT1)
10 Clear CMOS jumper (JP1)
11 System version jumper (JP5)
1 Locking tab
2 Power supply
3 Screws (4)
Figure
10).