- ページ 22

ストレージ Dell PowerVault 715NのPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Dell PowerVault 715N 44 ページ。 Network attached storage
Dell PowerVault 715N にも：アップデート手順 (4 ページ), ユーザーマニュアル (31 ページ)

ページを印刷する

Install the riser

card.

10. Install the

expansion

11.

Install the fan

assembly.

12.

Replace the system

13.

Replace the

bezel.

14. Reconnect any external peripheral cables that you disconnected from their connectors at the back of the system.

15. Connect the power to the system and turn on the system.

System Board Features

Figure 9

defines the system board features. The system board labels are in parentheses. Refer to this figure when

replacing your system board or components that attach to the system board.

Figure 9. System Board Features

Power Supply

Your system has a single power supply, which is secured by a locking tab and four screws (see

CAUTION:

Read the safety instructions in your System Information document.

Figure 10. Power Supply Removal

card.

cover.

1 Fan power connector (CPUFAN1)

2 DIP switch (SW3)

3 Microprocessor and heat sink (CPU)

4 Power supply connectors (CN1 and CN2)

5 Serial port connector (COM1)

6 Memory modules (DIMM1 and DIMM2)

7 PCI riser card slot (PCI1)

8 LAN connectors (LAN1 and LAN2)

9 Battery connector (BT1)

10 Clear CMOS jumper (JP1)

11 System version jumper (JP5)

1 Locking tab

2 Power supply

3 Screws (4)

Figure

10).