3 Day Blinds ARCH Instructions d'assemblage et d'installation - Page 4

Parcourez en ligne ou téléchargez le pdf Instructions d'assemblage et d'installation pour {nom_de_la_catégorie} 3 Day Blinds ARCH. 3 Day Blinds ARCH 8 pages.

Imprimer la page

If you are installing just an arch without a blind below it, proceed to

"Sand Alone Arch Installation". If you are installing an arch over a new

blind, proceed to "Arch Over A New Blind Installation".

If you are installing an arch over an existing blind, proceed to "Arch

Over An Existing Blind Installation".

STand aLone arch InSTaLLaTIon

• The arch bottom rail contains 2 pre-drilled holes. Position the arch

bottom rail in the window sill

sure the slats slope down toward the glass.

• Using a drill with a

a guide, drill 2 pilot holes into the window sill. If a drill is unavailable,

use a finish nail to start a pilot hole.

• Arrange the remaining individual wood slats in order according to

size (large to small).

arch InSTaLLaTIon

" drill bit and using the pre-drilled holes as

• Remove and discard the wood

shim located at the top of center

vertical support. Insert the top

slat into the center vertical

support, making sure the slat is

centered on the support, using

the blue tape on the slat as a

guide.

• Secure the top slat to the center

vertical support using a Phillips

screwdriver and the 1

drywall screw. Remove the blue

tape when finished.

" back from the front edge. Make

Page 3