3 Day Blinds ARCH Instructions d'assemblage et d'installation - Page 6

Parcourez en ligne ou téléchargez le pdf Instructions d'assemblage et d'installation pour {nom_de_la_catégorie} 3 Day Blinds ARCH. 3 Day Blinds ARCH 8 pages.

Imprimer la page

arch over an exISTInG BLInd InSTaLLaTIon

NOTE: If there is an existing blind in the brackets, remove the blind

before proceeding with the following step.

• Remove the arch from the window casing. Using a drill with

drill bit or an awl, make a small pilot hole at each pencil mark not

more than

• Arrange the remaining individual wood slats in order according to

size (large to small).

• Remove and discard the wood shims located in the bottom groove

of each vertical arch support.

" deep.

• Position the arch bottom rail

over the 2" wood blind

mounting brackets. The front

edge of the arch bottom rail

should be flush with the front

top edge of the bracket. The

bottom rail should be centered

in/over the window. Using a

pencil, mark two screw holes

through the bracket onto the

underside of the arch bottom

rail. Repeat for the other side of

the arch.

• Starting at the top of the arch

insert the remaining slats.

• Place the arch on top of the

mounting brackets and attach

the arch to the brackets using a

Phillips screwdriver and the

#6 X

screwing from the underside of

the brackets into the underside

of the arch bottom rail.

Page 5

inch screws by