Dell PowerVault TL2000 Informations importantes Manuel - Page 6

Parcourez en ligne ou téléchargez le pdf Informations importantes Manuel pour {nom_de_la_catégorie} Dell PowerVault TL2000. Dell PowerVault TL2000 10 pages. Tape library
Également pour Dell PowerVault TL2000 : Notes de mise à jour (3 pages), Pour commencer (38 pages), Faq (26 pages), Manuel de démarrage rapide (7 pages), Manuel du logiciel (16 pages), Manuel de configuration (22 pages), Addendum au manuel de l'utilisateur (2 pages), Manuel de démarrage (3 pages), Instructions sur les pièces jointes (17 pages), Brochure (4 pages), Manuel de l'utilisateur (20 pages)

Notes on TL2000/TL4000 Storage Capabilities

The Dell PowerVault TL2000 is configured out of the factory with 23 data

slots and one Import/Export (I/E) slot. It is possible to use all 24 slots as data

slots by configuring the Import/Export (I/E) slot as a storage slot.

NOTE:

To change the configuration of the Dell PowerVault TL2000, you must have

library firmware 3.90 or later. For more information, see the Dell PowerVault

TL2000/TL4000 User's Guide available on the Dell Support website at

support.dell.com.

The Dell PowerVault TL4000 is configured out of the factory with 44 data

slots, three Import/Export (I/E) slots, and a dedicated cleaning slot.

NOTE:

The dedicated cleaning slot is not available from firmware 3.90 onwards.

For information on setting up the cleaning slot as a storage slot, see the Dell

PowerVault TL2000/TL4000 User's Guide available on the Dell Support website at

support.dell.com.

It is possible to use all 48 slots as data slots by configuring the Import/Export

(I/E) slot and the dedicated cleaning slot as a storage slots.

NOTE:

To change the configuration of the Dell PowerVault TL2000, you must have

library firmware 3.90 or later. For more information, see the Dell PowerVault

TL2000/TL4000 User's Guide available on the Dell Support website at

support.dell.com.

Notes on Library Managed Encryption

•

Encrypted media cannot be re-used with a different EKM server

In order to re-use previously encrypted media using a different EKM server

(when the server has a different EKM keystore), the media must be erased

with encryption turned off in the library. This issue is a result of the ISV

applications attempting a read, prior to performing the erase and no key is

available for the read.

•

EKM server offline causes issues in the ISV

To prevent possible data loss due to an EKM server failure, it is

recommended to use a primary and secondary EKM server. This

configuration provides redundancy in the event of the primary EKM server

being down or unavailable. For more information on configuring a primary

and secondary EKM server for the library, refer to the Multiple Key

Managers for Redundancy (Chapter 2) of the Dell Encryption Key Manager

Important Information