Dell PowerVault TL2000 Важлива інформація Посібник - Сторінка 6

Переглянути онлайн або завантажити pdf Важлива інформація Посібник для Зберігання Dell PowerVault TL2000. Dell PowerVault TL2000 10 сторінок. Tape library
Також для Dell PowerVault TL2000: Примітки до випуску (3 сторінок), Початок роботи (38 сторінок), Питання (26 сторінок), Посібник із швидкого старту (7 сторінок), Посібник з програмного забезпечення (16 сторінок), Посібник з конфігурації (22 сторінок), Доповнення до посібника користувача (2 сторінок), Посібник для початківців (3 сторінок), Інструкції щодо вкладання (17 сторінок), Брошура (4 сторінок), Посібник користувача (20 сторінок)

Notes on TL2000/TL4000 Storage Capabilities

The Dell PowerVault TL2000 is configured out of the factory with 23 data

slots and one Import/Export (I/E) slot. It is possible to use all 24 slots as data

slots by configuring the Import/Export (I/E) slot as a storage slot.

NOTE:

To change the configuration of the Dell PowerVault TL2000, you must have

library firmware 3.90 or later. For more information, see the Dell PowerVault

TL2000/TL4000 User's Guide available on the Dell Support website at

support.dell.com.

The Dell PowerVault TL4000 is configured out of the factory with 44 data

slots, three Import/Export (I/E) slots, and a dedicated cleaning slot.

NOTE:

The dedicated cleaning slot is not available from firmware 3.90 onwards.

For information on setting up the cleaning slot as a storage slot, see the Dell

PowerVault TL2000/TL4000 User's Guide available on the Dell Support website at

support.dell.com.

It is possible to use all 48 slots as data slots by configuring the Import/Export

(I/E) slot and the dedicated cleaning slot as a storage slots.

NOTE:

To change the configuration of the Dell PowerVault TL2000, you must have

library firmware 3.90 or later. For more information, see the Dell PowerVault

TL2000/TL4000 User's Guide available on the Dell Support website at

support.dell.com.

Notes on Library Managed Encryption

•

Encrypted media cannot be re-used with a different EKM server

In order to re-use previously encrypted media using a different EKM server

(when the server has a different EKM keystore), the media must be erased

with encryption turned off in the library. This issue is a result of the ISV

applications attempting a read, prior to performing the erase and no key is

available for the read.

•

EKM server offline causes issues in the ISV

To prevent possible data loss due to an EKM server failure, it is

recommended to use a primary and secondary EKM server. This

configuration provides redundancy in the event of the primary EKM server

being down or unavailable. For more information on configuring a primary

and secondary EKM server for the library, refer to the Multiple Key

Managers for Redundancy (Chapter 2) of the Dell Encryption Key Manager

Important Information