Dell Brocade VDX 6940 Manuel de configuration - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Dell Brocade VDX 6940. Dell Brocade VDX 6940 12 pages. Ps series

Imprimer la page

Dell Brocade VDX 6940 Manuel de configuration

2.3

Configure management ports

sw0# configure

sw0(config)# interface Management 1/0

sw0(config-Management-1/0)# ip address <ip address/mask>

sw0(config-Management-1/0)# exit

2.4

Convert 40GbE ports to 10GbE mode

Note: For this example, physical ports 1–5 are converted from 40GbE mode to 4 x 10GbE mode.

sw0(config)# interface FortyGigabitEthernet 1/0/1-5

sw0(conf-if-fo-1/0/1-5)# shutdown

sw0(conf-if-fo-1/0/1-5)# exit

sw0(config)# hardware

sw0(config-hardware)# connector 1/0/1-5

sw0(config-connector-1/0/1-5)# sfp breakout

sw0(config-connector-1/0/1-5)# end

2.5

Configure port channel

sw0#configure

sw0(config)#interface Port-channel 1

sw0(config-Port-channel-1)# mtu 9216

sw0(config-Port-channel-1)# switchport

sw0(config-Port-channel-1)# switchport mode trunk

sw0(config-Port-channel-1)# qos flowcontrol tx off rx on

sw0(config-Port-channel-1)# speed 40000

sw0(config-Port-channel-1)# no shutdown

sw0(config-Port-channel-1)# exit

2.6

Configure ports for LAG

Note: For this example, ports 35 and 36 are used for the LAG interconnect.

sw0(config)# interface FortyGigabitEthernet 1/0/35-36

sw0(conf-if-fo-1/0/35-36)# no fabric isl enable

sw0(conf-if-fo-1/0/35-36)# no fabric trunk enable

sw0(conf-if-fo-1/0/35-36)# channel-group 1 mode active type brocade

sw0(conf-if-fo-1/0/35-36)# no cee

sw0(conf-if-fo-1/0/35-36)# no lldp disable

sw0(conf-if-fo-1/0/35-36)# no shutdown

sw0(conf-if-fo-1/0/35-36)# exit

Brocade VDX 6940 Switch Configuration Guide for Dell PS Series SANs | SCG3306