Dell PowerEdge M620 Manuel - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Dell PowerEdge M620. Dell PowerEdge M620 25 pages. Dell poweredge blade servers getting started guide
Également pour Dell PowerEdge M620 : Information Update (38 pages), Notes de mise à jour (27 pages), Manuel de l'utilisateur (23 pages), Informations importantes Manuel (35 pages), Manuel de mise à jour (32 pages), Manuel de mise à jour (28 pages), Manuel de l'utilisateur (26 pages), Manuel de l'utilisateur (22 pages), Manuel de démarrage (12 pages), Manuel de démarrage (12 pages), Manuel technique (46 pages), Manuel technique (49 pages), Manuel du portefeuille (27 pages), Manuel technique (44 pages), Manuel de démarrage (14 pages), Manuel de démarrage (12 pages)

Rev 1.00

Description:

Use this command to restart the module components. When this command is issued, PTM compo-

nents go through a full hardware reset, followed by software reload.

Options:

• device_number: specify a single device to reset

Example:

$ reload

3.5

Software Update Commands

Synopsys:

show image ver

Description:

Display the current software image version.

ADMIN: This command also displays the firmware version of each component.

Example:

# login admin

& show image ver

Software image short version: V Z.ZZ

Software image version: X.X.XXX-<date stamp>

Component #1 firmware version: Y.Y.YYY

Component #2 firmware version: Y.Y.YYY

Component #3 firmware version: Y.Y.YYY

& login user

Synopsys:

copy image from-file [device_number]

Description:

Update the firmware the PTM software image. In ADMIN mode, it allows selective upgrade of a

single device in the PTM. Immediately after running this command, the CLI waits for the user to

send the firmware image using the ZModem protocol. To abort this operation, use CTRL-C. For

additional details on the firmware update procedure refer to

on page 22

ADMIN:

Section 4, "Operating Procedures,"

Software User's Manual