Dell PowerEdge M620 Manuel - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Dell PowerEdge M620. Dell PowerEdge M620 25 pages. Dell poweredge blade servers getting started guide
Également pour Dell PowerEdge M620 : Information Update (38 pages), Notes de mise à jour (27 pages), Manuel de l'utilisateur (23 pages), Informations importantes Manuel (35 pages), Manuel de mise à jour (32 pages), Manuel de mise à jour (28 pages), Manuel de l'utilisateur (26 pages), Manuel de l'utilisateur (22 pages), Manuel de démarrage (12 pages), Manuel de démarrage (12 pages), Manuel technique (46 pages), Manuel technique (49 pages), Manuel du portefeuille (27 pages), Manuel technique (44 pages), Manuel de démarrage (14 pages), Manuel de démarrage (12 pages)

Imprimer la page
Dell PowerEdge M620 Manuel
Rev 1.00
2
Connecting to the 10GbE PTM CLI
If you are connecting to the system over a network, you will need an SSH client that supports
ZModem file transfer. The examples in this document use Secure CommNet v2.35 (download
from www.radient.com). After you download the software, some initial configuration is necessary.
Please follow the next configuration steps; when using a different client software, similar settings
should be available.
If you are connecting directly to the serial port of the Chassis Management Console (CMC), skip
to step (9).
1. Go to Setup => SSH2 settings, and set the compression to
.
none
Figure 4: Setup > SSH2 Settings
Figure 5: Set Compression to "none"
2. Go to Setup => Terminal Settings
9