Dell PowerEdge M620 Manual - Halaman 9

Jelajahi secara online atau unduh pdf Manual untuk Beralih Dell PowerEdge M620. Dell PowerEdge M620 25 halaman. Dell poweredge blade servers getting started guide
Juga untuk Dell PowerEdge M620: Pembaruan Informasi (38 halaman), Catatan Rilis (27 halaman), Panduan Pengguna (23 halaman), Panduan Informasi Penting (35 halaman), Manual Pembaruan (32 halaman), Manual Pembaruan (28 halaman), Panduan Pengguna (26 halaman), Panduan Pengguna (22 halaman), Panduan Memulai (12 halaman), Panduan Memulai (12 halaman), Panduan Teknis (46 halaman), Panduan Teknis (49 halaman), Panduan Portofolio (27 halaman), Panduan Teknis (44 halaman), Panduan Memulai (14 halaman), Panduan Memulai (12 halaman)

Rev 1.00

Connecting to the 10GbE PTM CLI

If you are connecting to the system over a network, you will need an SSH client that supports

ZModem file transfer. The examples in this document use Secure CommNet v2.35 (download

from www.radient.com). After you download the software, some initial configuration is necessary.

Please follow the next configuration steps; when using a different client software, similar settings

should be available.

If you are connecting directly to the serial port of the Chassis Management Console (CMC), skip

to step (9).

1. Go to Setup => SSH2 settings, and set the compression to

none

Figure 4: Setup > SSH2 Settings

Figure 5: Set Compression to "none"

2. Go to Setup => Terminal Settings