Dell S3048-ON Manuel de dépannage - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de dépannage pour {nom_de_la_catégorie} Dell S3048-ON. Dell S3048-ON 29 pages. Enterprise switches

Imprimer la page

This chapter describes system diagnostics and troubleshooting. After running the diagnostic tools, your system displays pass or fail test

results. If all tests pass, the diagnostic tools exit normally. If a test fails, each diagnostic tool offers a different result.

NOTE:

The troubleshooting package includes a README file that lists the tools version and the overall troubleshooting package

version. For more information, refer to this README file.

NOTE:

To download the Release Notes, go to http://www.dell.com/support.

This system uses the following troubleshooting tools:

•

Power-On Self Test (POST) diagnostic — Automatically runs during the system startup at the BIOS or U-boot level. This tool tests

for catastrophic hardware failures that prevent booting the system. The error code is saved in CMOS for the next boot. There is no

physical alarm indication.

•

Extended diagnostic application (EDA) — Tests the hardware for system failures. This is an on-demand diagnostic tool. EDA verifies

platform-specific hardware. There are options to perform diagnostics from a Quick Test to a thorough Intrusive test. If a test fails, you

can stop or continue boot-up. If you select the halt-on failure option, EDA testing does not continue. If you do not select the

halt-on failure option, EDA testing continues. Test results are saved in a user-defined storage area. There is no physical alarm

indication.

NOTE:

To test your hardware, Dell EMC strongly recommends using the EDA tool.

NOTE:

EDA runs in the ONIE environment, not in the networking operating system. You must be at the ONIE prompt to run EDA.

ONIE expansion

To view all the ONIE commands available, from the ONIE prompt, enter onie- and click <tab> twice.

ONIE:/ # onie- <TAB><TAB>

onie-boot-mode

onie-console

onie-discovery-start

onie-discovery-stop

Command line interface options

Each diagnostic tool has the following options:

Command

Description

—h

Help topics. Use help to find software-specific tools.

test

Tests against the preconfigured test file.

Topics:

•

S4810-ON system information

•

Boot processes

•

S4810–ON or S6000–ON diagnostic package

•

Troubleshooting issues

ONIE diagnostics

onie-fwpkg

onie-nos-install

onie-self-update

onie-support

ONIE diagnostics

onie-syseeprom

onie-sysinfo

onie-uninstaller