Dell S3048-ON Руководство по устранению неполадок - Страница 6
Просмотреть онлайн или скачать pdf Руководство по устранению неполадок для Переключатель Dell S3048-ON. Dell S3048-ON 29 страниц. Enterprise switches
Печатать страницу
This chapter describes system diagnostics and troubleshooting. After running the diagnostic tools, your system displays pass or fail test
results. If all tests pass, the diagnostic tools exit normally. If a test fails, each diagnostic tool offers a different result.
NOTE:
The troubleshooting package includes a README file that lists the tools version and the overall troubleshooting package
version. For more information, refer to this README file.
NOTE:
To download the Release Notes, go to http://www.dell.com/support.
This system uses the following troubleshooting tools:
•
Power-On Self Test (POST) diagnostic — Automatically runs during the system startup at the BIOS or U-boot level. This tool tests
for catastrophic hardware failures that prevent booting the system. The error code is saved in CMOS for the next boot. There is no
physical alarm indication.
•
Extended diagnostic application (EDA) — Tests the hardware for system failures. This is an on-demand diagnostic tool. EDA verifies
platform-specific hardware. There are options to perform diagnostics from a Quick Test to a thorough Intrusive test. If a test fails, you
can stop or continue boot-up. If you select the halt-on failure option, EDA testing does not continue. If you do not select the
halt-on failure option, EDA testing continues. Test results are saved in a user-defined storage area. There is no physical alarm
indication.
NOTE:
To test your hardware, Dell EMC strongly recommends using the EDA tool.
NOTE:
EDA runs in the ONIE environment, not in the networking operating system. You must be at the ONIE prompt to run EDA.
ONIE expansion
To view all the ONIE commands available, from the ONIE prompt, enter onie- and click <tab> twice.
ONIE:/ # onie- <TAB><TAB>
onie-boot-mode
onie-console
onie-discovery-start
onie-discovery-stop
Command line interface options
Each diagnostic tool has the following options:
Command
Description
—h
Help topics. Use help to find software-specific tools.
test
Tests against the preconfigured test file.
Topics:
•
S4810-ON system information
•
Boot processes
•
S4810–ON or S6000–ON diagnostic package
•
Troubleshooting issues
6
ONIE diagnostics
onie-fwpkg
onie-nos-install
onie-self-update
onie-support
ONIE diagnostics
onie-syseeprom
onie-sysinfo
onie-uninstaller
2