Dell S4100-ON Series Manuel d'installation - Page 32
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Dell S4100-ON Series. Dell S4100-ON Series 49 pages.
Également pour Dell S4100-ON Series : Manuel d'installation (47 pages), Manuel de configuration (21 pages), Manuel d'installation (48 pages)
Imprimer la page
2. Disconnect the power source.
3. Label and remove all cables.
4. Remove the switch from the rack.
Simultaneously, press in the two side-release bars on the switch and slide the switch forward.
If you are using the fan trays or PSUs in the replacement switch, remove them from the switch.
5. Unpack the new switch.
For more information, see Unpack.
6. Install the new switch in your rack or cabinet.
For detailed installation instructions, see
If you are using the fan trays or PSUs from the removed switch, reinsert them in the replacement switch.
7. Connect all the cables.
8. Power on the switch.
For more information, see
9. Establish a connection to the switch CLI.
10. Confirm that the software version of the replacement switch is the same as the previously installed switch.
show version
If the software versions do not match, upgrade the replacement switch software using the procedure that is included with
the firmware download.
11. Copy the backed-up switch configuration to the new switch.
copy tftp://hostip/filepath running-config
32
S4100–ON Series installation
S4100F-ON series
Switch power
up.
installation.