Dell S4100-ON Series Kurulum Kılavuzu - Sayfa 32

Anahtar Dell S4100-ON Series için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Dell S4100-ON Series 49 sayfaları.
Ayrıca Dell S4100-ON Series için: Kurulum Kılavuzu (47 sayfalar), Kurulum Kılavuzu (21 sayfalar), Kurulum Kılavuzu (48 sayfalar)

Sayfayı Yazdır

2. Disconnect the power source.

3. Label and remove all cables.

4. Remove the switch from the rack.

Simultaneously, press in the two side-release bars on the switch and slide the switch forward.

If you are using the fan trays or PSUs in the replacement switch, remove them from the switch.

5. Unpack the new switch.

For more information, see Unpack.

6. Install the new switch in your rack or cabinet.

For detailed installation instructions, see

If you are using the fan trays or PSUs from the removed switch, reinsert them in the replacement switch.

7. Connect all the cables.

8. Power on the switch.

For more information, see

9. Establish a connection to the switch CLI.

10. Confirm that the software version of the replacement switch is the same as the previously installed switch.

show version

If the software versions do not match, upgrade the replacement switch software using the procedure that is included with

the firmware download.

11. Copy the backed-up switch configuration to the new switch.

copy tftp://hostip/filepath running-config

S4100–ON Series installation

S4100F-ON series

Switch power

up.

installation.