Dell S6000-ON Manuel de dépannage - Page 20
Parcourez en ligne ou téléchargez le pdf Manuel de dépannage pour {nom_de_la_catégorie} Dell S6000-ON. Dell S6000-ON 29 pages. Open networking
Également pour Dell S6000-ON : Manuel de démarrage (26 pages), Manuel d'installation (41 pages)
Imprimer la page
In the fantool configuration output, the first six rows describe the six fans in your system and the devices that control the fans. The
second portion lists the speeds for the fans: low, medium, high, and default.
The first portion of the output lists the fan IDs, name, the device that controls the fan, the fan address on the I2C bus, and the instance of
the fan control within the chip. Also included is a description of which fan tray the fan is located in. The last two values in the configuration
file output are the speed resolution and the number of pulses per second.
Example of the fantool Configuration File Output
0 | Fan 1 | MAX6620 | 0x2a | 0 | Fan Tray 0 | 4 | 2
1 | Fan 2 | MAX6620 | 0x2a | 1 | Fan Tray 0 | 4 | 2
2 | Fan 3 | MAX6620 | 0x29 | 0 | Fan Tray 1 | 4 | 2
3 | Fan 4 | MAX6620 | 0x29 | 1 | Fan Tray 1 | 4 | 2
4 | Fan 5 | MAX6620 | 0x29 | 2 | Fan Tray 2 | 4 | 2
5 | Fan 6 | MAX6620 | 0x29 | 3 | Fan Tray 2 | 4 | 2
=====
0 | 5 | 2000 | 9000 | 19000 | 18000
temptool
The temperature tool (temptool) allows access to the thermal sensors on the boards and devices.
Temperatures are reported in degrees C. temptool also allows you to set the temperature thresholds for error and monitoring.
Example of the temptool Output
Syntax: ./temptool <option>
-h := show this help
test := test the pre-programmed configuration
# test <temperature_cfg_filename>
show := show current temp device values for
# show <temperature_cfg_filename>
nvramtool
The NVRAM tool (nvramtool) allows the setting of the control bits for POST testing.
Example of the nvramtool Output
Syntax: ./nvramtool <option>
20
ONIE diagnostics
-h := show this help
read := read nvram values at reg index
write <reg> <value> := write nvram value