Dell S6000-ON 문제 해결 매뉴얼 - 페이지 20

{카테고리_이름} Dell S6000-ON에 대한 문제 해결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell S6000-ON 29 페이지. Open networking
Dell S6000-ON에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (26 페이지), 설치 매뉴얼 (41 페이지)

페이지 인쇄

In the fantool configuration output, the first six rows describe the six fans in your system and the devices that control the fans. The

second portion lists the speeds for the fans: low, medium, high, and default.

The first portion of the output lists the fan IDs, name, the device that controls the fan, the fan address on the I2C bus, and the instance of

the fan control within the chip. Also included is a description of which fan tray the fan is located in. The last two values in the configuration

file output are the speed resolution and the number of pulses per second.

Example of the fantool Configuration File Output

0 | Fan 1 | MAX6620 | 0x2a | 0 | Fan Tray 0 | 4 | 2

1 | Fan 2 | MAX6620 | 0x2a | 1 | Fan Tray 0 | 4 | 2

2 | Fan 3 | MAX6620 | 0x29 | 0 | Fan Tray 1 | 4 | 2

3 | Fan 4 | MAX6620 | 0x29 | 1 | Fan Tray 1 | 4 | 2

4 | Fan 5 | MAX6620 | 0x29 | 2 | Fan Tray 2 | 4 | 2

5 | Fan 6 | MAX6620 | 0x29 | 3 | Fan Tray 2 | 4 | 2

=====

0 | 5 | 2000 | 9000 | 19000 | 18000

temptool

The temperature tool (temptool) allows access to the thermal sensors on the boards and devices.

Temperatures are reported in degrees C. temptool also allows you to set the temperature thresholds for error and monitoring.

Example of the temptool Output

Syntax: ./temptool <option>

-h := show this help

test := test the pre-programmed configuration

# test <temperature_cfg_filename>

show := show current temp device values for

# show <temperature_cfg_filename>

nvramtool

The NVRAM tool (nvramtool) allows the setting of the control bits for POST testing.

Example of the nvramtool Output

Syntax: ./nvramtool <option>

ONIE diagnostics

-h := show this help

read := read nvram values at reg index

write <reg> <value> := write nvram value