AVZ Twins Piazzola Instructions d'installation - Page 11
Parcourez en ligne ou téléchargez le pdf Instructions d'installation pour {nom_de_la_catégorie} AVZ Twins Piazzola. AVZ Twins Piazzola 20 pages. Gastro awning
Imprimer la page
Assembly instructions Twins
Subassembly Twins Piazzola
1. Pour a concrete foundation. Minimum dimensions: Length 85 cm, width 85 cm and height 20 cm.
Allow the concrete to cure properly.
2. Drill the holes in the foundation and fix the M16 threaded ends in place (slotted hole width is
18 mm).
3. Cut the length material to the correct size (see the enclosed materials list).
4. You determine the height of the legs. At a projection of 5 m and a minimum angle of 17°, the
upright length is 3,7 m.
5. Make the holes (Ø 11 mm) in the top of the leg as shown in the drawing below.
Attention! If water enters the supports, drill a hole in the bottom of it. This to prevent damage from
frost.
6. Drill holes with a cross-section of 11 mm in the aluminium support beam (see drawing).
Piazzola
Butterfly awning
®
®
Pour concrete foundation
85x85x20 cm
Twins Piazzola EN 27-08-2018
Side top cover support
Page 11