Award PM580/1s Instructions d'utilisation et d'installation - Page 10

Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'installation pour {nom_de_la_catégorie} Award PM580/1s. Award PM580/1s 12 pages.

Imprimer la page

USAGE

The appliance is operated by using knob control and the heat stored is

confirmed by residual heat indicator lamp on the vitroceramic surface.

After reapplying the supply voltage to the hob control after an interruption of

the supply voltage occurred, causes that the residual heat display flashes,

if the corresponding heater had a residual heat of greater + 60 ° C before

the power interruption occurred. The display will flash until the max. residual

heat time has expired or the heater will be selected and activated.

Knob controlled cooker is designed for

operating at 6 heat levels:

Keeping warm position

2-3

Heating position at low heat

4-5-6 Cooking – roasting and boiling

position

Residual Heat Functions

After all cooking processes there is some

heat stored in the vitroceramic glass

called residual heat. The control can

calculate roughly how hot the glass is

in the worst case. If the calculated

temperature is higher than + 60 ° C,

then this will be indicated in the related

residual heat indicator lamp. The residual

heat display is shown as long as the

calculated heater temperature is > + 60

° C.